Stm32 led blink

STM32 development settings on Mac

ST-Link connection

• VCC 3.3v
• GND
• SWDCLK
• SWDIO

Install Stm32CubeIde

• install stm32cubeclt
• install stm32cubeide

$ arm-none-eabi-gcc --version
arm-none-eabi-gcc (GNU Tools for STM32 13.3.rel1.20240926-1715) 13.3.1 20240614
Copyright (C) 2023 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

$ STM32_Programmer_CLI --version
      -------------------------------------------------------------------
                        STM32CubeProgrammer v2.19.0
      -------------------------------------------------------------------

STM32CubeProgrammer version: 2.19.0

$ ST-LINK_gdbserver --version

ST-LINK_gdbserver  version: 7.10.0

$ cmake --version
cmake version 3.28.1

CMake suite maintained and supported by Kitware (kitware.com/cmake).
$ ninja --version
1.11.1

Install ST Link Driver

brew install stlink

$ st-info --probe
Found 1 stlink programmers
  version:    V2J17S4
  serial:     56FF74066580515144522467
  flash:      524288 (pagesize: 2048)
  sram:       65536
  chipid:     0x414
  dev-type:   F1xx_HD

Issues

• If "st-info" shows no device, then check if the usb wine is good
• Stm32CubeIde does not work with none-original ST-Link device, error:

• If install old version of stm32cubeide, "“STM32CubeIDE is damaged and can’t be opened"